Roofing Sheet Manufacturer
We manufacture and supply a wide range of metal roofing sheets. The sheets are manufactured using high-quality raw materials and are UV protected to prevent color loss. These unbreakable sheets are appreciated for their long service life, lightweight, low flammability, and impact resistance. These roofing sheets are tested on various parameters for their optimum quality.
JSR Roofing & Engimetal Pvt. Ltd. 1005 Trapezoidal Profiles are supplied in different sections, thicknesses, lengths, and required dimensions. This profile is suitable for roof and wall panels. JSR Roofing & Engimetal Pvt Ltd 1005 Trapezoidal Profiles is for industry and trade; it is widely used in warehouses, industries, Airports, Railway Stations, Marriage Halls, Indore stadiums, etc.
PRE PAINTED GALVANISED STEEL SHEETS (PPGI)
- Material Confirm to : IS 277,IS 513 & is 14246
- Coating On : Hot Dip Galvanized Iron
- Thickness : 0.30 mm to 0.80 mm
- Zn Coating(GSM) : Zn 120
- Paint Systems : Regular Modified Polyester Paint(RMP), Optional (SMP & PVdF)
- Tensile Strength : 240Mpa to 340 Mpa
- Primer Service : 5μ microns Epoxy /
- Top Coat(Expossed Surface): 18 to 20 μ
- Bottom Coat : 5 to 7 μ
PRE PAINTED GALVALUME STEEL SHEETS (PPGL)
- Material Confirm to : AS 1397
- Coating On : Galvalume
- Thickness : 0.30 mm to 0.80mm
- Al-Zn Coating(GSM) : A Z 150
- Paint Systems : Regular modified Polyester Paint(RMP), Optional (SMP & PVdF)
- Tensile Strenght : 340Mpa to 550 Mpa
- Primer service coat : 5 μ microns Epoxy
- Top Coat Expossed Surface: 18 to 20 μ
- Bottom Coat: 5 to 7 μ
GALVALUME MILL FINISH (BARE GALVALUME)
- Material Confirm to: AS 1397
- Coating On : Cold Rolled Steel
- Thickness : Standard Thickness of 0.47mm TCT
- AL-Zn Coating(GSM ): AZ 150
- Tensile Strength : 340 Mpa to 550 Mpa
We provide all types of roofing sheets. These are below:
Solid Polycarbonate Sheet
UPVC Roofing Sheets
PVC Rigid Sheet
Multiwall Polycarbonate Sheet
Color Coated Sheet
PVC Corrugated Sheet
